Sturmey-Archer Shifter Before/After

I thought I'd have a go at resurrecting the original trigger shifter on the Huffy/Raleigh instead of putting on a new one. I really like the name plate on this one, so I wanted to try to keep it. These were not made to be dissembled, so I had to use a cotton swab soaked with cleaner (actually, just rubbing alcohol) to get to the inside parts. I also used a small screwdriver and a toothpick to get way in there and chip the dirt and grit away. I'll put a couple drops of oil in there when I'm ready to put it back on, and it should be fine.

To clean up the outside, I used my usual combination of fine steel wool and light oil, followed by Brasso. I would have used RidingPretty's wonderful green cleaning techniques, but I had that part done several weeks ago before she guest-posted here. Finally, I used a bit of red and black craft paint on a paper towel to refresh the color on the lettering. I just applied the paint across the letters with a corner of the towel, then wiped away the excess from the surface. It's not perfect, but certainly looks better than it did.