Salvaging a Hub, Part II

The final cleanup on the salvaged Sturmey-Archer TCW III was accomplished by scraping the remaining rust off with a razor blade, then several rounds of polishing with rubbing compound and Brasso. Some areas of the chrome have been cosmetically damaged by the rust, but not the scraping. There has been no structural damage to any of the exterior pieces of this hub. In fact, all cleaned up, many of the bits are in better shape than those on the Huffeigh. I don't post this to gloat (okay, maybe a little), but to demonstrate that even a hub that looks as bad as this one did may be worth a try to salvage and make useable again. Don't give up on bike or on salvage parts just because they look a little rough!